Summer Dreams Quilt

The Summer Dreams quilt is finished! Another summer sewing list item done :-)


This is a commissioned quilt for a Christening gift for a baby girl. It is based on my Sophie's Dreams quilt, using the same simple square pattern but with a slightly different selection of fabrics. I did stick with a similar colour palette though. I think for little girls the red and green combo is a good one. It avoids too much pink but is still girlie and pretty - but I did get some pink in there (of course!), especially some stronger pink values.


The backing is a pretty cream fabric with a small floral print with reds, pinks, and greens which I found in my local fabric shop. (They stock it in a number of colours and I love it, its a great backing/lining fabric). I appliqued the baby's name on the centre of the backing using raw edge applique - you can see the first few letters here. I like to make the letters a little wonky to match the wonky lines of the quilting.


Its quilted using the same wonky straight line method I used for the original Sophie's Dreams quilt, but I spaced the lines a little further apart this time. I do like the texture they give. This quilt fought me all the way when I was quilting it. I originally tried to do alternate straight & wavy lines but 5 lines in, it really wasn't working and I had to unpick all the rows :-( Even on the straight lines, nothing really flowed, I don't know why! Maybe because I took so long to baste it - it was on the floor for 3 nights because of my work schedule and I think that the fabric loosened out - the masking tape I used to hold the backing taut on the floor had come away in a few places but because I was almost done I didn't think much of it at the time, but I could feel it when it came to quilting.

All in all, I'm pretty happy with this one and I hope that it is well received by baby's mammy and J who ordered it.

Quilt Stats:

Name: Summer Dreams
Made For: Commissioned quilt for J - a Christening gift for her niece M
Fabric: A mix from my stash including Riley Blake's Rainy Days & Mondays and Bloom & Grow, Michael Miller Ta Dot, Ann Kelle Remix & Urban Zoologie, Alexander Henry Willow Wren. Momo's Freebird, Laurie Wisbrun's Tufted Tweets, Amy Schimler's On A Whim II (Owls & Cats) and lots more
Batting: Warm & White
Size: 59" x 51" approx
Quilting: Wonky straight lines
Pattern: Simple 7.5" squares

I'm officially on my holidays now so I think that posting might be very sporadic for the next couple of weeks as I spend a little quality time with the kids :-) But I will be posting an update on my Summer Sewing project the first week of July so if you linked up in May, get your posts ready for the mid-term review!! I can't wait to see what you've gotten done from your lists :-) You can also join in at that point if you want! I also have a new button for it if you want to grab it.

I'm also linking this up to Lily's Quilts Fresh Sewing Day - it's my fave make of June!

A Long Overdue WIP Wednesday!

It's been 3 weeks since I posted a WIP Wednesday update. Despite it still being busy, despite evening games of football with the kids, a constant battle against the creeping intrusion of the sandpit into my kitchen, children who can't go to sleep until it gets dark at 10:30pm and a little evening away with my lovely hubbie at the weekend, I still managed to get lots done this week. I kind of suprised myself! So here goes:

Completed this week:

Box pouch and coin purse:


I'm going to make a couple more of these for my kid's preschool teachers for next week, they were so easy to make and so lovely finished! This project also got my sewing mojo back in action - nothing like a quick, easy and fun project to inspire!

Work in Progress:



All of a sudden I have a lot going on. I am at basting stage with this commissioned quilt based on my previous "Sophie's Dreams" quilt. Thanks to everyone for their suggestions on names! I was going to name it after the little girl it's being made for but decided to go with "Summer Dreams" instead. After seeing how Becky quilted her Little Man quilt and how gorgeous it turned out, I think I might just steal that idea for quilting this one - hope you don't mind Becky? I reckon it will really work with this quilt!

I've finally got back to my Skittles quilt and have all the fabric cut for the quilt top. I also got the first 6 blocks made up:


This pattern uses the Stack n Slash method. At first, I got really confused sewing up the strips and was convinced I hadn't organised them correctly or had mixed up my layers of strips. Then about 1/3 of the way through, I suddenly "got" it and once I knew what I was doing, it was a breeze and I chain pieced the rest at top speed. I didn't manage to trim these blocks yet so the photo is a little messy, but you get the idea. There's another 3 fabrics to make up the next 6 blocks and then I need to make up another 12 the same as the first 12. I'm very excited about this one now.

I've another very important project going on which I'll tell you more about in a few weeks (*nothing like a bit of mystery, eh??*)

I finally got the blue fabrics I bought for Jennifer's Rainbow Charm swap in the post this evening - need to decide which one to use, cut it up and get back in the post before the end of the week. No pressure!!

I signed up for Elizabeth's Kaleidoscope Quiltalong (not being at all busy of course!)

Lastly, I signed up for Cindy's Japanese import fabric swap which is the first Irish fabric swap I've seen hosted - and I'm really excited about it. Its also open to people in the UK - I can't wait to receive my fabric. I'm always admiring the Japanese fabrics but find them a little pricey. This is such a great way to start a little stash of Japanese fabrics!

Ok - lots there despite the fact that I'm supposed to be taking it a bit easier! I'm linking up to WIP Wednesday over at Freshly Pieced with some super talented ladies!

PictureBox Quilt pattern/tutorial

This isn't a tutorial in the strict sense of the word, but, finally, here is the pattern for my PictureBox quilt. I hope you enjoy making it! If you do, please link up to my new Flickr group for projects made from my tutorials/patterns. I'd love to see them!!!


A couple of small things:
- Please link up to follow me on the sidebar if you make a quilt from this pattern :-) I'd be so thrilled if you did.
- Also, as with most tutes and patterns, it's intended for your own personal use or for gifts but is not for commercial use. Please do not sell quilts made from this pattern.


Ok, so here goes. Please read pattern fully before starting! If you have any questions on any aspects of it, or it doesn't make sense, feel free to ask me any questions via the comments or by email fairyfacedesigns@gmail.com I will answer any questions on the pattern in the comments section rather than back to you via email so that everyone can see the answers.This is the first quilt pattern I've written so please bear with me! And my apologies that I don't have better photos of various stages, I hadn't anticipated doing it as a pattern when I started making it. I also want to say a huge thanks to my friend Fi over at Patchwork Delights who did a sense check on it for me and had some great advice!


The finished quilt measures approx 60" long x 53" wide, slightly wider than cot bed size but not full twin bed size. It is a perfect size for using on a baby's cot bed and then layering over other covers when he/she moves to a twin bed.


Fabric Requirements:

• 3 Fat Quarters of large scale prints for the feature panels
• Fabric scraps for outside "frames" - variety of colours, shades & prints.
• Assortment of fat quarters & large scraps for the small squares - you will need approx 5 FQs or equivalent.
• 1 FQ small scale print/solid colour for framing feature panel
• Approx 1 yd white cotton for sashing ( I used Kona Ivory)
• 1/2 yard solid colour fabric for binding (I used a soft mid-blue shade)
• Backing fabric
• Cotton Batting - I used Warm & White cut off the roll, it was 60" x 64"
• Cotton thread for piecing and quilting. I used Gutterman cotton thread, colour 5709 (white)
• Rotary cutter, cutting mat and quilting ruler

Cutting List:

• From each of the feature fabrics cut a large panel measuring 16" x 10.5". (UPDATED MEASUREMENT) Decide on where best on the FQ to cut to get the best focus for your panel.

• From the FQ of small scale print/solid for framing cut 6 1.5" x 18" strips and 6 1.5" x 10.5" strips.

• From the smaller scraps cut the following, varying fabrics, shades, colours and prints:

          18 pieces - 4.5" x 3.5" (A)
          18 pieces - 3.5" x 3.5" (B)
          12 pieces - 2.5" x 3.5" (C)
            6 pieces - 5.5" x 3.5" (D)
            6 pieces - 6" x 3.5" (E)

• From the FQs/large scraps cut 36 5.5" squares (F) and 12 3.5" x 5.5" rectangles (G).
  
• For the sashing, cut 8 strips 2" x 27.5" (H) , 6 strips 2.5" x 18.5" (I) and 12 strips 2" x 18.5" (J)

Layout and Piecing Instructions:

Use 1/4 inch seams throughout.

1."Frame" the 3 large feature panels as follows:
Attach the small print strips to each side of the large panels by placing right sides together and sewing with a quarter inch seam. Press seams open (or to one side if you prefer). Now take top and bottom strips and sew to the panel & side border piece and press seams open.


2. Decide on the layout of the large panels from top to bottom. Once you have decided how to order them start arranging your small scrap pieces to form the 2nd layer of border frame for each panel.


Each side border should consist of following pieces: [1 x A, 2 x B, 1 x C] and each top/bottom border should consist of following pieces: [2 x A, 1 x B, 1 x C, 1 x D, 1 x E].


How you lay out the scraps for the borders is up to you; I suggest that you move around the composition on each line so that each line does not have exactly the same layout, otherwise it may lack in movement. Consider light and dark shades, colours, pattern etc. and how the bottom and top borders interact with the border on the panel above/below them.

3. Layout the side columns using pieces F & G alongside the large framed panels, leaving gaps where your white sashing will be. Each panel should have 2 pieced columns on either side. Each pieced colum consists of 3 x F and 1x G. I alternated the order/layout in each one, the top and bottom piece in each column should be a square, but I alternated the layout of the 2 middle pieces in each column.

4. Move the fabric around and tweak the layout until you're happy! I find it very useful to take some pics of the layout on my phone/camera and look at them during the process, it gives me a good "big picture" perspective of how pieces interact with each other. I don't follow any particular "rules" (I don't even know if there are any!), I tend to trust my eye in relation to colour and layout.


5. Assemble the pieces ready for sewing in an order that makes sense to you and that you will find it easy to sew with. I ususally pin groups of fabrics for each strip from either top to bottom or left to right and stick a post-it on top of each "pile" numbering them. Taking a picture before starting this process may help you later if any parts get mixed up.


Start piecing! Remember to iron all pieces beforehand and press seams open/to the side after sewing each set of seams. I use a quarter inch foot to get an accurate quarter inch seam.


6. Start with the big panel scrap borders and sew your border strips together. Start with the side borders, piecing the scraps together in a line until done following the layout you decided on. Sew to the sides of the feature panel right sides together. Do the same with the top and bottom borders until your large panel blocks are finished. Set aside for the moment.

7. Piece each of the side columns. Set aside.

9. Sew sashing pieces I to either side of each feature panel block.


10. Sew sashing pieces J to each side of each of the outside columns. Then join the "inside" sashing piece to the outer side of the inner column to make a large column block.


11. Now join each of the large column blocks to the feature panel block sashing, matching up the correct sides.


This leaves you with 3 large horizontally laid out blocks running the width of the quilt top.


12. Take the 8 sashing pieces H and divide into pairs. These will form the horizontal sashing. Join each pair along one of the short edges using a half inch seam.


13. Take the first long sashing strip and sew to the top edge of the top horizontal block, placing the seam in the middle of the block. Do same with next 2 horizontal blocks, and sew final sashing strip to lower edge of bottom horizontal block.


14. Sew middle block to top block along top edge of sashing & bottom edge of pieced block. Follow suit with lower & middle blocks.


15. Trim any excess sashing fabric from edges. Your quilt top is now finished! You will need to press all seams very carefully and trim any stray threads from the raw edges on the wrong side so that they don't show through your white sashing fabric when you start to quilt.

Backing & Basting:

Piece your backing fabric, if you desire. Once it is ready, lay out on a clean floor and, using masking tape, tape to the floor around all the edges, pulling fabric taut but not stretching it. Next, lay your batting down over this and smooth out the surface to lie completely flat. Your batting and backing should be at least 2” wider than your quilt top on all sides. Finally, lay your pressed quilt on top of the batting and take great care to ensure that it is smoothed out.  You will need to crawl around the quilt to get this right, but it’s worth taking the time. You will then need to baste the quilt using your preferred method. I used curved safety pins for quilting; they are much easier to work with than regular straight ones. I start at the middle of the quilt and work outward in a circular fashion, smoothing out any last wrinkles etc as I go. I pin approx every 4-6 inches. Once you are done, remove the masking tape carefully and check that the back has remained smooth and wrinkle free. It is now ready to be quilted!

Quilting:

I quilted the PictureBox with wonky straight lines, but I think it would also look great free motion quilted. It would also look good quilted in wider straight lines.

If you want to do the wonky straight lines, I started by marking a line down the centre of the quilt using a quilt marking tool, or you could use masking tape as a guide. Use your walking foot to ensure even feed of fabric (mine is integrated in my Pfaff machine and works with most of my presser feet). I quilted down the centre line and then used the outside of the widest presser foot I had as a guide for the remaining lines, working out from the centre, and working up and down the quilt in alternate lines. I varied the width of the lines, moving the needle position to get maximum width and allowed the presser foot to vary the line and wobble in and out in places to give the wonky effect. If you're doing this, use the straight seams to ensure you're not going totally "off track" and even things up a little; wonky is good, completely crooked and out of line just looks shoddy. If you want to free motion quilt, you will need to attach the correct foot and lower your feed dogs.

When you are finished quilting, use your rotary cutter and quilting ruler to trim the excess backing and batting from your quilt, and check your lines are straight.

Binding:

If you need detailed binding instructions check out these great, detailed tutorials: Oh, Fransson! or Jaybird Quilts

I use straight grain, double fold binding, but use whatever you prefer. This is how I do mine:

Measure around your quilt to get your total binding length needed and add on at least 10 inches for corners and to give you some spare. Cut enough strips from your binding fabrics to give you the total length, making provision for your seam allowances at the joins – 2.5” is a good width for binding, but you might want to go narrower or wider depending on your taste. Attach the strips to each other, right sides together using a quarter inch seam. I usually use a smaller stitch length here to strengthen the seam. Then fold the long strip in half, wrong side together, and iron the fold the whole length of the binding strip to give a nice sharp crease.

Return to your quilt, pin to your quilt top matching raw edges, making provision for mitred corners and join the ends carefully. Machine sew to the quilt using quarter inch seam. Fold over the binding and sew to back of quilt in whichever method you prefer. I love the look of a machine stitched binding but I know most people prefer it handstitched. Trim any stray threads.

The quilt is now done! Throw it in the washing machine, let it dry and enjoy its lovely crinkly texture. 

PictureBox quilt!

The PictureBox quilt is finished! (*Jumps up and down with excitement*)

I'm really so thrilled with how this quilt turned out. The 3 people who've seen it in "real life" thought it was lovely too so that eased the nerves a little about it!

This quilt is all out of my own head. Its inspiration came from the idea of an I Spy quilt but I had some fabrics with large prints which I wanted to use for it and I jumped from there to the idea of framed pictures - my son has some jungle prints framed on his wall which were part of the inspiration.



As I've said in a previous post, the panels on either side of the centre were inspired by those long photo frames holding 3-4 pictures vertically.

This quilt is made for a baby boy and is part of a two quilt set - the other being for his sister. I quilted the Sophie's Dreams quilt with wonky straight lines and after a LOT of thought I decided to stick with that approach for this one too. I threw around a number of other quilting techniques in my head - it wasn't an easy decision - but I wanted to keep some consistency between the quilts as they're quite different design wise. Plus, I do love the effect of the wonky straight lines, they give a lovely texture to the quilt.

The foundation of the design is 3 large fabric panels. Each one measures approx 10" x 15" and is framed with a 1 inch strip of a calm blue/green print, and then 3" wide strips of fabric in varying prints and colours. I tried to keep the scrappy border prints to geometrical type designs, rather than featuring more animals although I made a couple of exceptions to bring in some prints from the sister quilt.

The 3 main panels are (from top to bottom) Lesley Grainger's Wild Friends - Jungle Animals, Riley Blake's Hooty Hoot - Kangaroo and Ann Kelle's Urban Zoologie Owls. Like the Sophie's Dreams quilt, this quilt is made to be midway between cot bed and twin bed size so that it can be used straight away on baby's cot, and then layered up over other covers on his bed when he gets older, or used as a throw. The quilt sits nicely on a twin bed:

I decided that a solid colour binding would work best on this quilt as there's so much going on in the quilt. I went for a lovely soft blue cotton and it frames the quilt really nicely.

The backing is a white with a blue polka dot and is a single piece of fabric. The little boy's full name is appliqued in the centre of the quilt using some of the navy fabric used in the quilt and raw edge applique.

All in all, I'm really happy with it. The white space created by the sashing makes the design pattern stand out and there's lots of interest there for any little boy - jungle animals, elephants, owls, whales, kangaroos, koalas and more, along with some cars and lots of colour and texture too! 

I was pretty pleased when I put the two quilts together this morning, side by side. I made a conscious effort to try and use some of the same fabrics in the quilts in order to link them, as well as making them the same size and using the same straight line quilting. This is the Sophie's Dreams quilt - you can see the continuity of fabrics and quilting:





Here they are, jumbled together and you can see they work well together:



I brought them outside and draped them across a couple of chairs in the garden, I really like the effect:

Now all I need to do is wash and dry the PictureBox one to give it that lovely crinkly effect!



I'll be linking this up to



- also - Sew Modern Monday, Fabric Tuesday on QuiltStory and some other great sites - have a look at my sidebar buttons to see more!

I'm happy to share the measurements/pattern for this quilt if anyone is interested (I think some of you were when I posted the pic of the quilt top earlier this month). I don't have enough pics to do a full tutorial but just let me know in a comment or drop me an email and I can write up and post the pattern in a couple of week's time.

"Sophie's Dreams" Quilt

Today, I finished the quilt I am making.. I'm delighted with how it turned out. It's very bright and busy, but it works and I think there's a nice balance of colour in it. It's girlie without being too pink which I love!

It measures approx 53.5" by 60" which is midway between cot bed size and full twin bed size. It's designed like this to allow it to be used on Sophie's cot bed at the moment.

Then, when she moves into a bigger bed, it will be big enough to layer it up over another cover and keep using it. It is also a lovely size for a throw as she gets older :-)

    
I used Warm and White cotton batting in it, and the front is pieced almost entirely from designer fabrics - lots of mixing and matching in terms of pattern, fabric range etc but this adds to its charms. I quilted it using wonky straight lines, quite close together and it has ended up with a lovely texture!

This is one of my favourite parts of the top with the owls and ladybirds sitting side by side!

The back is pieced from 2 lengths of fabric - a small floral cotton print, and Sophie's full name is appliqued in the middle of the back. I used a solid green binding on this as a patterned binding would have been too much agains the quilt top.

Hope you all like as much as I do! Aren't the Russian dolls cute?

I'm linking this up to Fabric Tuesday on Quilt Story and some other parties too, check out the links on my sidebar -->